Как правильно настроить инет через vpn (соло)
Debian woody 2.4.18-bf2.4
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
auto lo
iface lo inet loopback
# The first network card - this entry was created during the Debian installation
# (network, broadcast and gateway are optional)
auto eth0
iface eth0 inet static
address 192.168.0.20
netmask 255.255.255.0
network 192.168.0.0
# broadcast 10.14.0.127
gateway 192.168.0.100
/etc/ppp/options
name pkXXXXvp1
nodefaultroute
noipdefault
noauth
asyncmap 0
crtscts
lock
hide-password
local
noproxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
nopersist
nodetach
debug
/etc/ppp/chap-secrets
# Secrets for authentication using CHAP
# client server secret IP addresses
# Added by automatic ipppd configuration
"pkXXXXvp1" * "XXXX" *
kird:~# pptp 195.222.64.68
using channel 4
Using interface ppp0
Connect: ppp0 <--> /dev/pts/4
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb2599b81> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <mru 1492> <auth chap MD5> <magic 0x49546511>]
sent [LCP ConfAck id=0x1 <mru 1492> <auth chap MD5> <magic 0x49546511>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xb2599b81> <pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0xb2599b81]
rcvd [CHAP Challenge id=0x1 <6803ac7853e36cf692f816aecb5d9576>, name = "PE1"]
sent [CHAP Response id=0x1 <4d0d4360567396b493d051173ec625b9>, name = "pkXXXXvp1"]
rcvd [LCP EchoRep id=0x0 magic=0x49546511]
rcvd [CHAP Success id=0x1 ""]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [IPCP ConfReq id=0x1 <addr 10.100.0.1>]
sent [IPCP ConfAck id=0x1 <addr 10.100.0.1>]
rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0>]
rcvd [LCP ProtRej id=0x2 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
rcvd [IPCP ConfNak id=0x2 <addr 10.100.0.180>]
sent [IPCP ConfReq id=0x3 <addr 10.100.0.180>]
rcvd [IPCP ConfAck id=0x3 <addr 10.100.0.180>]
local IP address 10.100.0.180
remote IP address 10.100.0.1
Script /etc/ppp/ip-up started (pid 727)
rcvd [LCP EchoReq id=0x1 magic=0x49546511 78 00 18 04]
sent [LCP EchoRep id=0x1 magic=0xb2599b81 15 03 2f 01]
Script /etc/ppp/ip-up finished (pid 727), status = 0x1
rcvd [LCP EchoReq id=0x2 magic=0x49546511 78 00 18 04]
sent [LCP EchoRep id=0x2 magic=0xb2599b81 15 03 2f 01]
rcvd [LCP EchoReq id=0x3 magic=0x49546511 78 00 18 04]
sent [LCP EchoRep id=0x3 magic=0xb2599b81 15 03 2f 01]
sent [LCP EchoReq id=0x1 magic=0xb2599b81]
rcvd [LCP EchoRep id=0x1 magic=0x49546511]
rcvd [LCP EchoReq id=0x4 magic=0x49546511 78 00 18 04]
sent [LCP EchoRep id=0x4 magic=0xb2599b81 15 03 2f 01]
rcvd [LCP EchoReq id=0x5 magic=0x49546511 78 00 18 04]
sent [LCP EchoRep id=0x5 magic=0xb2599b81 15 03 2f 01]
rcvd [LCP EchoReq id=0x6 magic=0x49546511 78 00 18 04]
sent [LCP EchoRep id=0x6 magic=0xb2599b81 15 03 2f 01]
sent [LCP EchoReq id=0x2 magic=0xb2599b81]
rcvd [LCP EchoRep id=0x2 magic=0x49546511]
и т.д. ..................
kird:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:00:86:4D:46:7B
inet addr:192.168.0.20 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1158 errors:0 dropped:0 overruns:167 frame:0
TX packets:246 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:98393 (96.0 KiB) TX bytes:19671 (19.2 KiB)
Interrupt:12 Base address:0xc800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:124 errors:0 dropped:0 overruns:0 frame:0
TX packets:124 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8218 (8.0 KiB) TX bytes:8218 (8.0 KiB)
ppp0 Link encap:Point-to-Point Protocol
inet addr:10.100.0.180 P-t-P:10.100.0.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:40 (40.0 b) TX bytes:61 (61.0 b)
что не так, или чего не хватает?
