Купил PCI Controller USB 2.0 port 4+2 channel на свою голову

kif0rt · Сообщение **kif0rt** » 30 мар 2006, 23:10

Купил я значит вот этот PCI контроллер. Для того чтобы заиметь usb 2.0 , а то на моей Acorp 694TA такого и в помине нету ... Основная задача, которую я хотел возложить на сей девайс -- это запись/чтение с моего HDD-плеера iRIVER H-10. И вот тут-то как раз и обломс ...........

В описании сказано :

Тип контроллера USB
Чип Ali M5273
Внутренний порт 2 порта USB 2.0 Type A
Внешний порт 4 порта USB 2.0 Type A
Интерфейс PCI 2.2 32-бит, 33 МГц
Пропускная способность интерфейса :
HS (480 Мбит/сек), FS (12 Мбит/сек), LS (1.5 Мбит/сек)

а lspci мне пишет :

Код: Выделить всё

0000:00:09.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:09.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:09.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:09.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)

Или настолько туп, или получается, что у меня на самом деле 3 порта дерьмового 1.1 и только 1 порт 2.0.
Ну и ладно думаю, пусть хоть один порт, но работает на 2.0. Но тут такая штука выходит ... Обычная флешка распознаётся (т.е. появляется новое устройство и монтируется) на ура в любом из 4-ёх внешних портов. Правда проверить скорость записи я не могу т.к. флешка только usb 1.1 ... А вот с плеером всё намного хуже. максимум я получаю от lsusb :

Код: Выделить всё

Bus 006 Device 009: ID 4102:2002 iRiver, Ltd.
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 002: ID 10ab:10c5 USI Co., Ltd Sony-Ericsson datacable
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

Т.е. устройство вроде как распазнаётся (iRIVER USB MASS STORAGE и т.д. ), но никаких устойств не создаётся. В slax 5.0.8 такой результат я получал тольько гна одном порту , остальные три молчали как партизаны. А вот стоит только мне втыркнуть плеер в мой родной контроллер usb 1.1 на материнке, то всё прекрасно подхватывается, монтироуется. читается/пишется. Вообщем я не знаю , что делать ...
А

Llama · Сообщение **Llama** » 31 мар 2006, 08:26

kif0rt, что происходит при выткании плеера? Что-нить пишется в dmesg? Модули сответсвующие подгружены для 1.1 и 2.2 ? PS: Проверь поддерживаемость версий PCI контроллера и материнской платы. Например в паре с 440BX это контроллер однозначно будет глючить... Спеков 694T я не помню, так что надобы проверить...

kif0rt · Сообщение **kif0rt** » 31 мар 2006, 11:10

Llama писал(а):kif0rt, что происходит при выткании плеера? Что-нить пишется в dmesg? Модули сответсвующие подгружены для 1.1 и 2.2 ? PS: Проверь поддерживаемость версий PCI контроллера и материнской платы. Например в паре с 440BX это контроллер однозначно будет глючить... Спеков 694T я не помню, так что надобы проверить...

О блин ... совсем забыл про dmesg

Да интересную инфу он даёт :

Код: Выделить всё

[4295272.793000] usb 6-4: new high speed USB device using ehci_hcd and address 3
[4295273.205000] SCSI subsystem initialized
[4295273.220000] Initializing USB Mass Storage driver...
[4295273.229000] scsi0 : SCSI emulation for USB Mass Storage devices
[4295273.232000] usb-storage: device found at 3
[4295273.232000] usb-storage: waiting for device to settle before scanning
[4295273.232000] usbcore: registered new driver usb-storage
[4295273.232000] USB Mass Storage support registered.
[4295278.232000]   Vendor: IRIVER    Model: IRIVER H10        Rev:
[4295278.232000]   Type:   Direct-Access                      ANSI SCSI revision : 00
[4295278.245000] usb-storage: device scan complete
[4295278.341000] SCSI device sda: 9767521 512-byte hdwr sectors (5001 MB)
[4295278.342000] sda: Write Protect is off
[4295278.342000] sda: Mode Sense: 45 00 00 00
[4295278.342000] sda: assuming drive cache: write through
[4295278.560000] SCSI device sda: 9767521 512-byte hdwr sectors (5001 MB)
[4295278.606000] sda: Write Protect is off
[4295278.606000] sda: Mode Sense: 45 00 00 00
[4295278.606000] sda: assuming drive cache: write through
[4295278.606000]  /dev/scsi/host0/bus0/target0/lun0:<6>SCSI error : <0 0 0 0> re turn code = 0x70000
[4295278.701000] end_request: I/O error, dev sda, sector 0
[4295278.701000] Buffer I/O error on device sda, logical block 0
[4295278.748000] SCSI error : <0 0 0 0> return code = 0x70000
[4295278.748000] end_request: I/O error, dev sda, sector 1
[4295278.748000] Buffer I/O error on device sda, logical block 1
[4295278.752000] SCSI error : <0 0 0 0> return code = 0x70000
[4295278.752000] end_request: I/O error, dev sda, sector 2
[4295278.752000] Buffer I/O error on device sda, logical block 2
[4295278.753000] SCSI error : <0 0 0 0> return code = 0x70000
[4295278.753000] end_request: I/O error, dev sda, sector 3
[4295278.753000] Buffer I/O error on device sda, logical block 3
[4295278.800000] SCSI error : <0 0 0 0> return code = 0x70000
[4295278.800000] end_request: I/O error, dev sda, sector 4
[4295278.800000] Buffer I/O error on device sda, logical block 4
[4295278.832000] SCSI error : <0 0 0 0> return code = 0x70000
[4295278.832000] end_request: I/O error, dev sda, sector 5
[4295278.832000] Buffer I/O error on device sda, logical block 5
[4295278.884000] SCSI error : <0 0 0 0> return code = 0x70000
[4295278.884000] end_request: I/O error, dev sda, sector 6
[4295278.884000] Buffer I/O error on device sda, logical block 6
[4295278.907000] SCSI error : <0 0 0 0> return code = 0x70000
[4295278.907000] end_request: I/O error, dev sda, sector 7
[4295278.907000] Buffer I/O error on device sda, logical block 7
[4295279.030000] SCSI error : <0 0 0 0> return code = 0x70000
[4295279.030000] end_request: I/O error, dev sda, sector 0
[4295279.030000] Buffer I/O error on device sda, logical block 0
[4295279.045000] SCSI error : <0 0 0 0> return code = 0x70000
[4295279.045000] end_request: I/O error, dev sda, sector 1
[4295279.045000] Buffer I/O error on device sda, logical block 1
[4295279.080000] SCSI error : <0 0 0 0> return code = 0x70000
[4295279.080000] end_request: I/O error, dev sda, sector 2
[4295279.089000] SCSI error : <0 0 0 0> return code = 0x70000
[4295279.089000] end_request: I/O error, dev sda, sector 3
[4295279.111000] SCSI error : <0 0 0 0> return code = 0x70000
[4295279.111000] end_request: I/O error, dev sda, sector 4
[4295279.137000] SCSI error : <0 0 0 0> return code = 0x70000
[4295279.137000] end_request: I/O error, dev sda, sector 5
[4295279.152000] SCSI error : <0 0 0 0> return code = 0x70000
[4295279.152000] end_request: I/O error, dev sda, sector 6
[4295279.216000] SCSI error : <0 0 0 0> return code = 0x70000
[4295279.216000] end_request: I/O error, dev sda, sector 7
[4295279.216000]  unable to read partition table
[4295279.336000] Attached scsi removable disk sda at scsi0, channel 0, id 0, lun  0
[4295280.047000] SCSI device sda: 9767521 512-byte hdwr sectors (5001 MB)
[4295280.048000] sda: Write Protect is off
[4295280.048000] sda: Mode Sense: 45 00 00 00
[4295280.048000] sda: assuming drive cache: write through
[4295280.223000] SCSI device sda: 9767521 512-byte hdwr sectors (5001 MB)
[4295280.224000] sda: Write Protect is off
[4295280.224000] sda: Mode Sense: 45 00 00 00
[4295280.224000] sda: assuming drive cache: write through
[4295280.224000]  /dev/scsi/host0/bus0/target0/lun0: unable to read partition ta ble
[4295280.423000] SCSI device sda: 9767521 512-byte hdwr sectors (5001 MB)
[4295280.424000] sda: Write Protect is off
[4295280.424000] sda: Mode Sense: 45 00 00 00
[4295280.424000] sda: assuming drive cache: write through
[4295280.596000] SCSI device sda: 9767521 512-byte hdwr sectors (5001 MB)
[4295280.598000] sda: Write Protect is off
[4295280.598000] sda: Mode Sense: 45 00 00 00
[4295280.598000] sda: assuming drive cache: write through
[4295280.598000]  /dev/scsi/host0/bus0/target0/lun0:<6>SCSI error : <0 0 0 0> re turn code = 0x70000
[4295280.697000] end_request: I/O error, dev sda, sector 0
[4295280.718000] SCSI error : <0 0 0 0> return code = 0x70000
[4295280.718000] end_request: I/O error, dev sda, sector 1
[4295280.731000] SCSI error : <0 0 0 0> return code = 0x70000
[4295280.731000] end_request: I/O error, dev sda, sector 2
[4295280.759000] SCSI error : <0 0 0 0> return code = 0x70000
[4295280.759000] end_request: I/O error, dev sda, sector 3
[4295280.780000] SCSI error : <0 0 0 0> return code = 0x70000
[4295280.780000] end_request: I/O error, dev sda, sector 4
[4295280.786000] SCSI error : <0 0 0 0> return code = 0x70000
[4295280.786000] end_request: I/O error, dev sda, sector 5
[4295280.795000] SCSI error : <0 0 0 0> return code = 0x70000
[4295280.795000] end_request: I/O error, dev sda, sector 6
[4295280.820000] SCSI error : <0 0 0 0> return code = 0x70000
[4295280.820000] end_request: I/O error, dev sda, sector 7
[4295281.032000] SCSI error : <0 0 0 0> return code = 0x70000
[4295281.032000] end_request: I/O error, dev sda, sector 0
[4295281.069000] SCSI error : <0 0 0 0> return code = 0x70000
[4295281.069000] end_request: I/O error, dev sda, sector 1
[4295281.083000] SCSI error : <0 0 0 0> return code = 0x70000
[4295281.083000] end_request: I/O error, dev sda, sector 2
[4295281.099000] SCSI error : <0 0 0 0> return code = 0x70000
[4295281.099000] end_request: I/O error, dev sda, sector 3
[4295281.139000] SCSI error : <0 0 0 0> return code = 0x70000
[4295281.139000] end_request: I/O error, dev sda, sector 4
[4295281.140000] SCSI error : <0 0 0 0> return code = 0x70000
[4295281.140000] end_request: I/O error, dev sda, sector 5
[4295281.141000] SCSI error : <0 0 0 0> return code = 0x70000
[4295281.141000] end_request: I/O error, dev sda, sector 6
[4295281.157000] SCSI error : <0 0 0 0> return code = 0x70000
[4295281.157000] end_request: I/O error, dev sda, sector 7
[4295281.157000]  unable to read partition table
[4295283.581000] sda : READ CAPACITY failed.
[4295283.581000] sda : status=0, message=00, host=7, driver=00
[4295283.581000] sda : sense not available.
[4295283.614000] sda: Write Protect is off
[4295283.614000] sda: Mode Sense: 00 00 00 00
[4295283.614000] sda: assuming drive cache: write through
[4295283.929000] sda : READ CAPACITY failed.
[4295283.929000] sda : status=0, message=00, host=7, driver=00
[4295283.929000] sda : sense not available.
[4295283.969000] sda: Write Protect is off
[4295283.969000] sda: Mode Sense: 00 00 00 00
[4295283.969000] sda: assuming drive cache: write through
[4295283.969000]  /dev/scsi/host0/bus0/target0/lun0:<4>printk: 118 messages supp ressed.
[4295283.969000] Buffer I/O error on device sda, logical block 0
[4295283.970000]  unable to read partition table
[4295286.370000] sda : READ CAPACITY failed.
[4295286.370000] sda : status=0, message=00, host=7, driver=00
[4295286.370000] sda : sense not available.
[4295286.417000] sda: Write Protect is off
[4295286.417000] sda: Mode Sense: 00 00 00 00
[4295286.417000] sda: assuming drive cache: write through
[4295286.694000] sda : READ CAPACITY failed.
[4295286.694000] sda : status=0, message=00, host=7, driver=00
[4295286.694000] sda : sense not available.
[4295286.848000] sda: Write Protect is off
[4295286.848000] sda: Mode Sense: 00 00 00 00
[4295286.848000] sda: assuming drive cache: write through
[4295286.848000]  /dev/scsi/host0/bus0/target0/lun0: unable to read partition ta ble
[4295289.185000] sda : READ CAPACITY failed.
[4295289.185000] sda : status=0, message=00, host=7, driver=00
[4295289.185000] sda : sense not available.
[4295289.245000] sda: Write Protect is off
[4295289.245000] sda: Mode Sense: 00 00 00 00
[4295289.245000] sda: assuming drive cache: write through
[4295289.456000] sda : READ CAPACITY failed.
[4295289.456000] sda : status=0, message=00, host=7, driver=00
[4295289.456000] sda : sense not available.
[4295289.554000] sda: Write Protect is off
[4295289.554000] sda: Mode Sense: 00 00 00 00
[4295289.554000] sda: assuming drive cache: write through
[4295289.554000]  /dev/scsi/host0/bus0/target0/lun0:<4>printk: 3 messages suppre ssed.
[4295289.554000] Buffer I/O error on device sda, logical block 0
[4295289.555000]  unable to read partition table
[4295291.813000] sda : READ CAPACITY failed.
[4295291.813000] sda : status=0, message=00, host=7, driver=00
[4295291.813000] sda : sense not available.
[4295291.893000] sda: Write Protect is off
[4295291.893000] sda: Mode Sense: 00 00 00 00
[4295291.893000] sda: assuming drive cache: write through
[4295292.137000] sda : READ CAPACITY failed.
[4295292.137000] sda : status=0, message=00, host=7, driver=00
[4295292.137000] sda : sense not available.
[4295292.182000] sda: Write Protect is off
[4295292.182000] sda: Mode Sense: 00 00 00 00
[4295292.182000] sda: assuming drive cache: write through
[4295292.182000]  /dev/scsi/host0/bus0/target0/lun0: unable to read partition ta ble
[4295294.450000] sda : READ CAPACITY failed.
[4295294.450000] sda : status=0, message=00, host=7, driver=00
[4295294.450000] sda : sense not available.
[4295294.480000] sda: Write Protect is off
[4295294.480000] sda: Mode Sense: 00 00 00 00
[4295294.480000] sda: assuming drive cache: write through
[4295294.774000] sda : READ CAPACITY failed.
[4295294.774000] sda : status=0, message=00, host=7, driver=00
[4295294.774000] sda : sense not available.
[4295294.825000] sda: Write Protect is off
[4295294.825000] sda: Mode Sense: 00 00 00 00
[4295294.825000] sda: assuming drive cache: write through
[4295294.825000]  /dev/scsi/host0/bus0/target0/lun0:<4>printk: 3 messages suppre ssed.
[4295294.825000] Buffer I/O error on device sda, logical block 0
[4295294.825000]  unable to read partition table
[4295297.125000] sda : READ CAPACITY failed.
[4295297.125000] sda : status=0, message=00, host=7, driver=00
[4295297.125000] sda : sense not available.
[4295297.160000] sda: Write Protect is off
[4295297.160000] sda: Mode Sense: 00 00 00 00
[4295297.160000] sda: assuming drive cache: write through
[4295297.491000] sda : READ CAPACITY failed.
[4295297.491000] sda : status=0, message=00, host=7, driver=00
[4295297.491000] sda : sense not available.
[4295297.527000] sda: Write Protect is off
[4295297.527000] sda: Mode Sense: 00 00 00 00
[4295297.527000] sda: assuming drive cache: write through
[4295297.527000]  /dev/scsi/host0/bus0/target0/lun0: unable to read partition ta ble
[4295299.777000] sda : READ CAPACITY failed.
[4295299.777000] sda : status=0, message=00, host=7, driver=00
[4295299.777000] sda : sense not available.
[4295299.810000] sda: Write Protect is off
[4295299.810000] sda: Mode Sense: 00 00 00 00
[4295299.810000] sda: assuming drive cache: write through
[4295299.950000] sda : READ CAPACITY failed.
[4295299.950000] sda : status=0, message=00, host=7, driver=00
[4295299.950000] sda : sense not available.
[4295299.989000] sda: Write Protect is off
[4295299.989000] sda: Mode Sense: 00 00 00 00
[4295299.989000] sda: assuming drive cache: write through
[4295299.989000]  /dev/scsi/host0/bus0/target0/lun0:<4>printk: 3 messages suppre ssed.
[4295299.989000] Buffer I/O error on device sda, logical block 0
[4295299.990000]  unable to read partition table

Вот так вот ... Это значит, что ФС (FAT) покоцана что ли ? Но почему тогда с usb 1.1 всё работает ?
А при вытыкании просто :

Код: Выделить всё

[4295782.876000] usb 6-4: USB disconnect, address 3

модули вроде подгружены :

Код: Выделить всё

usb_storage            64704  0
scsi_mod              124872  2 sd_mod,usb_storage
usbserial              26984  1 cp2101
usbcore               104316  7 usb_storage,cp2101,usbserial,ehci_hcd,ohci_hcd,uhci_hcd
ide_core              125268  5 usb_storage,ide_cd,ide_disk,ide_generic,via82cxxx

А вот как проверить совместимость моей материнки я не знаю

Нашёл с мане по мамек только то что PCI там тоже на 33Mhz работаёт, а вот версию не нашёл ...