не могу заставить принтер работать :-(

phaoost · Сообщение **phaoost** » 10 июл 2006, 02:32

сабж. после перехода на etch пришось переустановить omni-driver. но он перестал работать.
в 1-м случае пользуем родной gs-esp 8.15 - в нём есть поддрежка omni. на выходе после установок получаю в логах cups:

Код: Выделить всё

D [09/Jul/2006:15:15:26 +0300] [Job 1] foomatic-gswrapper: gs '-dPARANOIDSAFER' '-dBATCH' '-dNOPAUSE' '-sOutputFile=/dev/fd/3' '-sDEVICE=omni' '-sDeviceName=Epson_LQ_100' '-sproperties=Copies=1 InputTray=Rear NumberUp=1X1 NumberUpDirection=TorightTobottom OutputBin=Top Form=na_letter Resolution=360x180 Rotation=Portrait SheetCollate=SheetUncollated Sides=OneSidedFront Trimming=None bidirectional=false dither=DITHER_STUCKI_DIFFUSION media=MEDIA_PLAIN printmode=PRINT_MODE_1_ANY ' '/dev/fd/0' 3>&1 1>&2
D [09/Jul/2006:15:15:26 +0300] [Job 1] ESP Ghostscript 815.01 (2005-09-22)
D [09/Jul/2006:15:15:26 +0300] [Job 1] Copyright (C) 2004 artofcode LLC, Benicia, CA.  All rights reserved.
D [09/Jul/2006:15:15:26 +0300] [Job 1] This software comes with NO WARRANTY: see the file PUBLIC for details.
D [09/Jul/2006:15:15:27 +0300] [Job 1] <<<<<<<<<<<<<<<<<<<<<<ERROR>>>>>>>>>>>>>>>>>>>>>>>
D [09/Jul/2006:15:15:27 +0300] [Job 1]
D [09/Jul/2006:15:15:27 +0300] [Job 1] Error: Could not load libomni.so
D [09/Jul/2006:15:15:27 +0300] [Job 1] Error: Loading "/usr/lib/ghostscript/libomni.so" returns "/usr/lib/ghostscript/libomni.so: invalid mode for dlopen(): Invalid argument"
D [09/Jul/2006:15:15:27 +0300] [Job 1] Error: Loading "/usr/lib/Omni/libomni.so" returns "/usr/lib/Omni/libomni.so: invalid mode for dlopen(): Invalid argument"
D [09/Jul/2006:15:15:27 +0300] [Job 1] Error: Loading "/opt/Omni/bin/libomni.so" returns "/opt/Omni/bin/libomni.so: invalid mode for dlopen(): Invalid argument"
D [09/Jul/2006:15:15:27 +0300] [Job 1] Error: Loading "/opt/Omni/lib/libomni.so" returns "/opt/Omni/lib/libomni.so: invalid mode for dlopen(): Invalid argument"
D [09/Jul/2006:15:15:27 +0300] [Job 1] Error: Loading "./libomni.so" returns "./libomni.so: invalid mode for dlopen(): Invalid argument"
D [09/Jul/2006:15:15:27 +0300] [Job 1] Error: Loading "libomni.so" returns "libomni.so: invalid mode for dlopen(): Invalid argument"
D [09/Jul/2006:15:15:27 +0300] [Job 1] <<<<<<<<<<<<<<<<<<<<<<ERROR>>>>>>>>>>>>>>>>>>>>>>>
D [09/Jul/2006:15:15:27 +0300] [Job 1]
D [09/Jul/2006:15:15:27 +0300] [Job 1] Error: Could not load libomni.so
D [09/Jul/2006:15:15:27 +0300] [Job 1] Error: Loading "/usr/lib/ghostscript/libomni.so" returns "/usr/lib/ghostscript/libomni.so: invalid mode for dlopen(): Invalid argument"
D [09/Jul/2006:15:15:27 +0300] [Job 1] Error: Loading "/usr/lib/Omni/libomni.so" returns "/usr/lib/Omni/libomni.so: invalid mode for dlopen(): Invalid argument"
D [09/Jul/2006:15:15:27 +0300] [Job 1] Error: Loading "/opt/Omni/bin/libomni.so" returns "/opt/Omni/bin/libomni.so: invalid mode for dlopen(): Invalid argument"
D [09/Jul/2006:15:15:27 +0300] [Job 1] Error: Loading "/opt/Omni/lib/libomni.so" returns "/opt/Omni/lib/libomni.so: invalid mode for dlopen(): Invalid argument"
D [09/Jul/2006:15:15:27 +0300] [Job 1] Error: Loading "./libomni.so" returns "./libomni.so: invalid mode for dlopen(): Invalid argument"
D [09/Jul/2006:15:15:27 +0300] [Job 1] Error: Loading "libomni.so" returns "libomni.so: invalid mode for dlopen(): Invalid argument"
D [09/Jul/2006:15:15:27 +0300] [Job 1]
D [09/Jul/2006:15:15:27 +0300] [Job 1] <<<<<<<<<<<<<<<<<<<<<<ERROR>>>>>>>>>>>>>>>>>>>>>>>
D [09/Jul/2006:15:15:27 +0300] [Job 1]
D [09/Jul/2006:15:15:27 +0300] [Job 1] Error: Could not load libomni.so
D [09/Jul/2006:15:15:27 +0300] [Job 1] renderer return value: 1
D [09/Jul/2006:15:15:27 +0300] [Job 1] renderer received signal: 1
D [09/Jul/2006:15:15:27 +0300] [Job 1] tail process done writing data to STDOUT
D [09/Jul/2006:15:15:27 +0300] [Job 1] KID4 finished
D [09/Jul/2006:15:15:27 +0300] [Job 1] KID4 exited with status 0
D [09/Jul/2006:15:15:27 +0300] [Job 1] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [09/Jul/2006:15:15:27 +0300] [Job 1] error: Illegal seek (29)

далее, берём сорс gs-gpl 7.05.3 - это последняя версия, которую поддерживает omni-patches находящиеся в сорсах omni. имеем:

Код: Выделить всё

D [10/Jul/2006:02:21:44 +0300] [Job 7] foomatic-gswrapper: gs '-dPARANOIDSAFER' '-dBATCH' '-dNOPAUSE' '-sOutputFile=/dev/fd/3' '-sDEVICE=omni' '-sDeviceName=Epson_LQ_100' '-sproperties=Copies=1 InputTray=Rear NumberUp=1X1 NumberUpDirection=TorightTobottom OutputBin=Top Form=na_letter Resolution=360x180 Rotation=Portrait SheetCollate=SheetUncollated Sides=OneSidedFront Trimming=None bidirectional=false dither=DITHER_STUCKI_DIFFUSION media=MEDIA_PLAIN printmode=PRINT_MODE_1_ANY ' '/dev/fd/0' 3>&1 1>&2
D [10/Jul/2006:02:21:44 +0300] [Job 7]
D [10/Jul/2006:02:21:44 +0300] [Job 7] Closing renderer
D [10/Jul/2006:02:21:44 +0300] [Job 7] GNU Ghostscript 7.05 (2002-04-22)
D [10/Jul/2006:02:21:44 +0300] [Job 7] Copyright (C) 2002 artofcode LLC, Benicia, CA.  All rights reserved.
D [10/Jul/2006:02:21:44 +0300] [Job 7] This software comes with NO WARRANTY: see the file PUBLIC for details.
D [10/Jul/2006:02:21:44 +0300] [Job 7] sh: line 1:  9435 Segmentation fault      gs '-dPARANOIDSAFER' '-dBATCH' '-dNOPAUSE' '-sOutputFile=/dev/fd/3' '-sDEVICE=omni' '-sDeviceName=Epson_LQ_100' '-sproperties=Copies=1 InputTray=Rear NumberUp=1X1 NumberUpDirection=TorightTobottom OutputBin=Top Form=na_letter Resolution=360x180 Rotation=Portrait SheetCollate=SheetUncollated Sides=OneSidedFront Trimming=None bidirectional=false dither=DITHER_STUCKI_DIFFUSION media=MEDIA_PLAIN printmode=PRINT_MODE_1_ANY ' '/dev/fd/0' 3>&1 1>&2
D [10/Jul/2006:02:21:44 +0300] [Job 7] renderer return value: 139
D [10/Jul/2006:02:21:44 +0300] [Job 7] renderer received signal: 139
D [10/Jul/2006:02:21:44 +0300] [Job 7] Process dying with "The renderer may have dumped core.", exit stat: 3
D [10/Jul/2006:02:21:44 +0300] [Job 7] error: Illegal seek (29)
D [10/Jul/2006:02:21:44 +0300] [Job 7] The renderer may have dumped core.
D [10/Jul/2006:02:21:44 +0300] [Job 7] tail process done writing data to STDOUT
D [10/Jul/2006:02:21:44 +0300] [Job 7] KID4 finished
D [10/Jul/2006:02:21:44 +0300] [Job 7] KID3 exited with status 3
D [10/Jul/2006:02:21:44 +0300] [Job 7] Renderer exit stat: 3
D [10/Jul/2006:02:21:44 +0300] [Job 7] Renderer process finished
D [10/Jul/2006:02:21:44 +0300] [Job 7] Killing process 9432 (KID3)
D [10/Jul/2006:02:21:44 +0300] [Job 7] Process dying with "Error closing renderer", exit stat: 3
D [10/Jul/2006:02:21:44 +0300] [Job 7] error: Illegal seek (29)
D [10/Jul/2006:02:21:44 +0300] [Job 7] Error closing renderer
d [10/Jul/2006:02:21:45 +0300] PID 9427 exited with no errors.
E [10/Jul/2006:02:21:47 +0300] PID 9426 stopped with status 3!
D [10/Jul/2006:02:21:47 +0300] UpdateJob: job 7, file 0 is complete.

omni компилится только gcc/g++-3.3. пытался перекомпилить родной gs-esp 8.15 из сорсов этой же версией - результат тот же

/usr/lib/Omni/libomni.so существует (пробовал заменить симлинк на сам файл). что за dlopen() и чего ему нуна я не знаю :-\

подскажите, что делать? или обратно на сарж откатиться?

а! кстати, /dev/fd/* не существует. как их правильно создать? (/dev - статический)

Llama · Сообщение **Llama** » 10 июл 2006, 09:02

phaoost, /dev/fd/ не трогай плс...

Насчет этой проблемы- репорти баг в багзиллу debian.