Код: Выделить всё
Linux version 2.6.27.14-desktop-1mnb (qateam@titan.mandriva.com) (gcc version 4.3.2 (GCC) ) #1 SMP Wed Feb 18 03:40:45 EST 2009
Command line: BOOT_IMAGE=linux root=UUID=3f539ebe-075f-406f-a0d7-877f43fb5b56 resume=UUID=c9b19db5-9cb3-49ac-af30-f16c559eaca1 splash=silent vga=788
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000afee0000 (usable)
BIOS-e820: 00000000afee0000 - 00000000afee3000 (ACPI NVS)
BIOS-e820: 00000000afee3000 - 00000000afef0000 (ACPI data)
BIOS-e820: 00000000afef0000 - 00000000aff00000 (reserved)
BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xafee0 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping
0000000000 - 00afe00000 page 2M
00afe00000 - 00afee0000 page 4k
kernel direct mapping tables up to afee0000 @ 10000-15000
last_map_addr: afee0000 end: afee0000
RAMDISK: 37c06000 - 37fefbe1
ACPI: RSDP 000F7520, 0024 (r2 Nvidia)
ACPI: XSDT AFEE3100, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
ACPI: FACP AFEED3C0, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0)
ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080609]
ACPI: DSDT AFEE3280, A0D8 (r1 NVIDIA ASUSACPI 1000 MSFT 3000000)
ACPI: FACS AFEE0A80, 0040
ACPI: HPET AFEED600, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98)
ACPI: MCFG AFEED680, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
ACPI: APIC AFEED500, 008E (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-00000000afee0000
Bootmem setup node 0 0000000000000000-00000000afee0000
NODE_DATA [0000000000013000 - 0000000000017fff]
bootmap [0000000000018000 - 000000000002dfdf] pages 16
(6 early reservations) ==> bootmem [0000000000 - 00afee0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 00007f388c] TEXT DATA BSS ==> [0000200000 - 00007f388c]
#3 [0037c06000 - 0037fefbe1] RAMDISK ==> [0037c06000 - 0037fefbe1]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
found SMP MP-table at [ffff8800000f5990] 000f5990
[ffffe20000000000-ffffe200027fffff] PMD -> [ffff880001200000-ffff8800039fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000afee0
On node 0 totalpages: 720495
DMA zone: 2299 pages, LIFO batch:0
DMA32 zone: 706715 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
PERCPU: Allocating 51744 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 709014
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=linux root=UUID=3f539ebe-075f-406f-a0d7-877f43fb5b56 resume=UUID=c9b19db5-9cb3-49ac-af30-f16c559eaca1 splash=silent vga=788
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 1799.951 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Checking aperture...
No AGP bridge found
Node 0: aperture @ 40000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Memory: 2830500k/2882432k available (3084k kernel code, 51480k reserved, 1559k data, 540k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.89 BogoMIPS (lpj=1799949)
Security Framework initialized
AppArmor: AppArmor disabled by boottime parameter
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Hook version: 2.6.27-2.3 2008/08/29
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
tseg: 00aff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
Early unpacking initramfs... done
Freeing initrd memory: 4006k freed
ACPI: Core revision 20080609
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom™ 9150e Quad-Core Processor stepping 03
Using local APIC timer interrupts.
APIC timer calibration result 12499657
Detected 12.499 MHz APIC timer.
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3600.07 BogoMIPS (lpj=1800039)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Phenom™ 9150e Quad-Core Processor stepping 03
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2/2 ip 6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 3599.97 BogoMIPS (lpj=1799989)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 2/2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Phenom™ 9150e Quad-Core Processor stepping 03
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3/3 ip 6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 3599.99 BogoMIPS (lpj=1799999)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 3/3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: AMD Phenom™ 9150e Quad-Core Processor stepping 03
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (14399.95 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-3 level CPU
groups: 0 1 2 3
domain 1: span 0-3 level NODE
groups: 0-3
CPU1 attaching sched-domain:
domain 0: span 0-3 level CPU
groups: 1 2 3 0
domain 1: span 0-3 level NODE
groups: 0-3
CPU2 attaching sched-domain:
domain 0: span 0-3 level CPU
groups: 2 3 0 1
domain 1: span 0-3 level NODE
groups: 0-3
CPU3 attaching sched-domain:
domain 0: span 0-3 level CPU
groups: 3 0 1 2
domain 1: span 0-3 level NODE
groups: 0-3
net_namespace: 1552 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
node 0 link 0: io port [9000, ffff]
TOM: 00000000c0000000 aka 3072M
Fam 10h mmconf [f0000000, f00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, efffffff]
node 0 link 0: mmio [f4000000, fe02ffff]
node 0 link 0: mmio [f0000000, f06fffff] ==> [f0100000, f06fffff]
bus: [00,06] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [c0000000, efffffff]
bus: 00 index 3 mmio: [f0700000, fcffffffff]
bus: 00 index 4 mmio: [f0100000, f06fffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG at f0000000 - f3ffffff
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:01.1 reg 10 io port: [ff00, ff3f]
PCI: 0000:00:01.1 reg 20 io port: [1c00, 1c3f]
PCI: 0000:00:01.1 reg 24 io port: [1c40, 1c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
PCI: 0000:00:01.3 reg 10 32bit mmio: [fdf80000, fdffffff]
PCI: 0000:00:02.0 reg 10 32bit mmio: [fe02f000, fe02ffff]
pci 0000:00:02.0: supports D1
pci 0000:00:02.0: supports D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
PCI: 0000:00:02.1 reg 10 32bit mmio: [fe02e000, fe02e0ff]
pci 0000:00:02.1: supports D1
pci 0000:00:02.1: supports D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
PCI: 0000:00:04.0 reg 10 32bit mmio: [fe02d000, fe02dfff]
pci 0000:00:04.0: supports D1
pci 0000:00:04.0: supports D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
PCI: 0000:00:04.1 reg 10 32bit mmio: [fe02c000, fe02c0ff]
pci 0000:00:04.1: supports D1
pci 0000:00:04.1: supports D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
PCI: 0000:00:06.0 reg 20 io port: [fc00, fc0f]
PCI: 0000:00:07.0 reg 10 32bit mmio: [fe020000, fe023fff]
pci 0000:00:07.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: PME# disabled
PCI: 0000:00:09.0 reg 10 io port: [9f0, 9f7]
PCI: 0000:00:09.0 reg 14 io port: [bf0, bf3]
PCI: 0000:00:09.0 reg 18 io port: [970, 977]
PCI: 0000:00:09.0 reg 1c io port: [b70, b73]
PCI: 0000:00:09.0 reg 20 io port: [f700, f70f]
PCI: 0000:00:09.0 reg 24 32bit mmio: [fe026000, fe027fff]
PCI: 0000:00:0a.0 reg 10 32bit mmio: [fe02b000, fe02bfff]
PCI: 0000:00:0a.0 reg 14 io port: [f600, f607]
PCI: 0000:00:0a.0 reg 18 32bit mmio: [fe02a000, fe02a0ff]
PCI: 0000:00:0a.0 reg 1c 32bit mmio: [fe029000, fe02900f]
pci 0000:00:0a.0: supports D1
pci 0000:00:0a.0: supports D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: PME# disabled
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: PME# disabled
PCI: 0000:01:0a.0 reg 10 32bit mmio: [fdeff000, fdefffff]
pci 0000:01:0a.0: supports D1
pci 0000:01:0a.0: supports D2
pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:0a.0: PME# disabled
pci 0000:00:08.0: transparent bridge
PCI: bridge 0000:00:08.0 io port: [e000, efff]
PCI: bridge 0000:00:08.0 32bit mmio: [fde00000, fdefffff]
PCI: bridge 0000:00:08.0 32bit mmio pref: [fdd00000, fddfffff]
PCI: 0000:02:00.0 reg 10 32bit mmio: [fb000000, fbffffff]
PCI: 0000:02:00.0 reg 14 64bit mmio: [d8000000, dfffffff]
PCI: 0000:02:00.0 reg 1c 64bit mmio: [e6000000, e7ffffff]
PCI: 0000:02:00.0 reg 24 io port: [dc00, dc7f]
PCI: 0000:02:00.0 reg 30 32bit mmio: [0, 1ffff]
PCI: bridge 0000:00:0b.0 io port: [d000, dfff]
PCI: bridge 0000:00:0b.0 32bit mmio: [fb000000, fcffffff]
PCI: bridge 0000:00:0b.0 64bit mmio pref: [d8000000, e7ffffff]
PCI: bridge 0000:00:10.0 io port: [c000, cfff]
PCI: bridge 0000:00:10.0 32bit mmio: [fdc00000, fdcfffff]
PCI: bridge 0000:00:10.0 64bit mmio pref: [fdb00000, fdbfffff]
PCI: bridge 0000:00:12.0 io port: [b000, bfff]
PCI: bridge 0000:00:12.0 32bit mmio: [fda00000, fdafffff]
PCI: bridge 0000:00:12.0 64bit mmio pref: [fd900000, fd9fffff]
PCI: bridge 0000:00:13.0 io port: [a000, afff]
PCI: bridge 0000:00:13.0 32bit mmio: [fd800000, fd8fffff]
PCI: bridge 0000:00:13.0 64bit mmio pref: [fd700000, fd7fffff]
PCI: bridge 0000:00:14.0 io port: [9000, 9fff]
PCI: bridge 0000:00:14.0 32bit mmio: [fd600000, fd6fffff]
PCI: bridge 0000:00:14.0 64bit mmio pref: [fd500000, fd5fffff]
Код: Выделить всё
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Linux Plug and Play Support v0.97 © Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
DMAR:parse DMAR table failure.
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 2
ACPI: RTC can wake from S4
system 00:01: ioport range 0x1000-0x107f has been reserved
system 00:01: ioport range 0x1080-0x10ff has been reserved
system 00:01: ioport range 0x1400-0x147f has been reserved
system 00:01: ioport range 0x1480-0x14ff has been reserved
system 00:01: ioport range 0x1800-0x187f has been reserved
system 00:01: ioport range 0x1880-0x18ff has been reserved
system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved
system 00:01: iomem range 0xb0000000-0xbfffffff could not be reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x87f has been reserved
system 00:02: ioport range 0x290-0x297 has been reserved
system 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved
system 00:0b: iomem range 0xcd000-0xcffff has been reserved
system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
system 00:0b: iomem range 0xfeff0000-0xfeff00ff could not be reserved
system 00:0b: iomem range 0xafee0000-0xafefffff could not be reserved
system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:0b: iomem range 0x0-0x9ffff could not be reserved
system 00:0b: iomem range 0x100000-0xafedffff could not be reserved
system 00:0b: iomem range 0xafff0000-0xbffeffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved
system 00:0b: iomem range 0xfff80000-0xfff80fff could not be reserved
system 00:0b: iomem range 0xfff90000-0xfffbffff could not be reserved
system 00:0b: iomem range 0xfffed000-0xfffeffff could not be reserved
pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
pci 0000:00:08.0: IO window: 0xe000-0xefff
pci 0000:00:08.0: MEM window: 0xfde00000-0xfdefffff
pci 0000:00:08.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
pci 0000:00:0b.0: IO window: 0xd000-0xdfff
pci 0000:00:0b.0: MEM window: 0xfb000000-0xfcffffff
pci 0000:00:0b.0: PREFETCH window: 0x000000d8000000-0x000000e7ffffff
pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
pci 0000:00:10.0: IO window: 0xc000-0xcfff
pci 0000:00:10.0: MEM window: 0xfdc00000-0xfdcfffff
pci 0000:00:10.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
pci 0000:00:12.0: PCI bridge, secondary bus 0000:04
pci 0000:00:12.0: IO window: 0xb000-0xbfff
pci 0000:00:12.0: MEM window: 0xfda00000-0xfdafffff
pci 0000:00:12.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff
pci 0000:00:13.0: PCI bridge, secondary bus 0000:05
pci 0000:00:13.0: IO window: 0xa000-0xafff
pci 0000:00:13.0: MEM window: 0xfd800000-0xfd8fffff
pci 0000:00:13.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff
pci 0000:00:14.0: PCI bridge, secondary bus 0000:06
pci 0000:00:14.0: IO window: 0x9000-0x9fff
pci 0000:00:14.0: MEM window: 0xfd600000-0xfd6fffff
pci 0000:00:14.0: PREFETCH window: 0x000000fd500000-0x000000fd5fffff
pci 0000:00:08.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16
pci 0000:00:10.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:10.0: setting latency timer to 64
ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16
pci 0000:00:12.0: PCI INT A -> Link[AE2A] -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.0: setting latency timer to 64
ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16
pci 0000:00:13.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:13.0: setting latency timer to 64
ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16
pci 0000:00:14.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:14.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [e000, efff]
bus: 01 index 1 mmio: [fde00000, fdefffff]
bus: 01 index 2 mmio: [fdd00000, fddfffff]
bus: 01 index 3 io port: [0, ffff]
bus: 01 index 4 mmio: [0, ffffffffffffffff]
bus: 02 index 0 io port: [d000, dfff]
bus: 02 index 1 mmio: [fb000000, fcffffff]
bus: 02 index 2 mmio: [d8000000, e7ffffff]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 io port: [c000, cfff]
bus: 03 index 1 mmio: [fdc00000, fdcfffff]
bus: 03 index 2 mmio: [fdb00000, fdbfffff]
bus: 03 index 3 mmio: [0, 0]
bus: 04 index 0 io port: [b000, bfff]
bus: 04 index 1 mmio: [fda00000, fdafffff]
bus: 04 index 2 mmio: [fd900000, fd9fffff]
bus: 04 index 3 mmio: [0, 0]
bus: 05 index 0 io port: [a000, afff]
bus: 05 index 1 mmio: [fd800000, fd8fffff]
bus: 05 index 2 mmio: [fd700000, fd7fffff]
bus: 05 index 3 mmio: [0, 0]
bus: 06 index 0 io port: [9000, 9fff]
bus: 06 index 1 mmio: [fd600000, fd6fffff]
bus: 06 index 2 mmio: [fd500000, fd5fffff]
bus: 06 index 3 mmio: [0, 0]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
audit: initializing netlink socket (disabled)
type=2000 audit(1235514499.827:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 5536
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:07.0: Enabling HT MSI Mapping
pci 0000:00:08.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:0a.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Enabling HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:12.0: Enabling HT MSI Mapping
pci 0000:00:13.0: Enabling HT MSI Mapping
pci 0000:00:14.0: Enabling HT MSI Mapping
pci 0000:02:00.0: Boot video device
pcieport-driver 0000:00:10.0: setting latency timer to 64
pcieport-driver 0000:00:10.0: found MSI capability
pci_express 0000:00:10.0:pcie00: allocate port service
pcieport-driver 0000:00:12.0: setting latency timer to 64
pcieport-driver 0000:00:12.0: found MSI capability
pci_express 0000:00:12.0:pcie00: allocate port service
pcieport-driver 0000:00:13.0: setting latency timer to 64
pcieport-driver 0000:00:13.0: found MSI capability
pci_express 0000:00:13.0:pcie00: allocate port service
pcieport-driver 0000:00:14.0: setting latency timer to 64
pcieport-driver 0000:00:14.0: found MSI capability
pci_express 0000:00:14.0:pcie00: allocate port service
vesafb: framebuffer at 0xe7000000, mapped to 0xffffc20005100000, using 1875k, total 14336k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
hpet_resources: 0xfeff0000 is busy
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
registered taskstats version 1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 540k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 23
ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.14-desktop-1mnb ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 22
ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
ehci_hcd 0000:00:04.1: irq 22, io mem 0xfe02c000
usb 1-5: new high speed USB device using ehci_hcd and address 2
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb 1-5: configuration #1 chosen from 1 choice
usb 1-5: New USB device found, idVendor=058f, idProduct=6362
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Mass Storage Device
usb 1-5: Manufacturer: Generic
usb 1-5: SerialNumber: 058F312D81B
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.14-desktop-1mnb ehci_hcd
usb usb2: SerialNumber: 0000:00:04.1
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 21
ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.14-desktop-1mnb ohci_hcd
usb usb3: SerialNumber: 0000:00:02.0
ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 20
ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:04.0: irq 20, io mem 0xfe02d000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27.14-desktop-1mnb ohci_hcd
usb usb4: SerialNumber: 0000:00:04.0
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
No dock devices found.
libata version 3.00 loaded.
ahci 0000:00:09.0: version 3.0
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
ahci 0000:00:09.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 23
ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 23
ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 23
ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 23
ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 23
ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 23
usb 4-1: new low speed USB device using ohci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
usb 4-1: New USB device found, idVendor=15d9, idProduct=0a33
usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-1: Product: USB Mouse
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: SAMSUNG HD161HJ, GF100-07, max UDMA7
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD161HJ GF10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
pata_amd 0000:00:06.0: version 0.3.10
pata_amd 0000:00:06.0: setting latency timer to 64
scsi6 : pata_amd
scsi7 : pata_amd
ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ata7.01: ATAPI: ATAPI DVD A DH20A4P, 9P53, max UDMA/66
ata7: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (600:30:0x1c)
ata7.01: limited to UDMA/33 due to 40-wire cable
ata7.01: configured for UDMA/33
ata8: port disabled. ignoring.
isa bounce pool size: 16 pages
scsi 6:0:1:0: CD-ROM ATAPI DVD A DH20A4P 9P53 PQ: 0 ANSI: 5
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ohci1394 0000:01:0a.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000134d29b]
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: sda6: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 254713
EXT3-fs: sda6: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
TomoyoLinux Mandatory Access Control disabled by default.
You need to install ccs-tools if you want to enable it.
Initializing USB Mass Storage driver...
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 6:0:1:0: Attached scsi generic sg1 type 5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:1:0: Attached scsi CD-ROM sr0
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, hpet irqs
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
processor ACPI0007:00: registered as cooling_device0
processor ACPI0007:01: registered as cooling_device1
processor ACPI0007:02: registered as cooling_device2
input: Power Button (CM) as /class/input/input3
processor ACPI0007:03: registered as cooling_device3
ACPI: Power Button (CM) [PWRB]
ACPI: WMI: Mapper loaded
ACPI: Expecting a [Reference] package element, found type 0
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
fan PNP0C0B:00: registered as cooling_device4
ACPI: Fan [FAN] (on)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
forcedeth 0000:00:0a.0: setting latency timer to 64
input: PC Speaker as /class/input/input4
usbcore: registered new interface driver hiddev
input: USB Mouse as /class/input/input5
input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:04.0-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1f:c6:73:83:a1
forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:07.0: setting latency timer to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
EXT3 FS on sda6, internal journal
scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 8:0:0:0: [sdb] Attached SCSI removable disk
sd 8:0:0:0: Attached scsi generic sg2 type 0
scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 8:0:0:1: [sdc] Attached SCSI removable disk
sd 8:0:0:1: Attached scsi generic sg3 type 0
scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 8:0:0:2: [sdd] Attached SCSI removable disk
sd 8:0:0:2: Attached scsi generic sg4 type 0
scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 8:0:0:3: [sde] Attached SCSI removable disk
sd 8:0:0:3: Attached scsi generic sg5 type 0
usb-storage: device scan complete
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
loop: module loaded
Adding 4088500k swap on /dev/sda7. Priority:-1 extents:1 across:4088500k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 20
nvidia 0000:02:00.0: PCI INT A -> Link[AIGP] -> GSI 20 (level, low) -> IRQ 20
nvidia 0000:02:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.70 Wed Aug 27 12:46:19 PDT 2008
ip_tables: © 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
ClusterIP Version 0.8 loaded successfully
eth0: no IPv6 routers present
ip6_tables: © 2000-2006 Netfilter Core Team
netfilter PSD loaded - © astaro AG
IFWLOG: register target