Помогите разобраться с VPN
Добавлено: 17 фев 2010, 17:57
Я админ для Винды 8 лет стажа, решил изучать Линукс, так все серьезные серваки на нем.
Немогу выйти в инет если расказывать то у нас ADSL-модем в свиче (его IP 192.168.183.10) в Винде прописывается этот >192.168.183.10 как основной шлюз, роутер провайдера >(IP 10.1.8.1) который прописывается в создании подключения VPN или так называемый (PPTP), шифрования данных через один протокол СНАР, сетевухе 2 DNS сервера их IP 213.184.255.37 и 213.184.224.254 но я как понел это DNS сервера для всей Беларусии, а у меня припостоянном подключении (PPTP) IP DNS севера 213.184.254.33, как я понел это DNS локальный для моего областного города Могилева. Разуется что при подключении (PPTP) IP клиента присвоенно меняются.
Ивините, за длинное предисловия, но у меня подключения осуществляются но IP rambler.ru не пингуются т.е инета НЕТ. Я выложу события,а ВЫ подскажите кто сможет, ПИЗ!!!
А все локал IP пигуются это 192.168.183.10 и 10.1.8.1.
[root@localhost ~]# pptp-command
1.) start
2.) stop
3.) setup
4.) quit
What task would you like to do?: 1
Unsafe characters in tunnel name /etc/ppp/peers/atlant~
Unsafe characters in tunnel name /etc/ppp/peers/__default~
Unsafe characters in tunnel name /etc/ppp/peers/ewr~
Unsafe characters in tunnel name /etc/ppp/peers/sdsd~
Unsafe characters in tunnel name /etc/ppp/peers/atlant~
Unsafe characters in tunnel name /etc/ppp/peers/__default~
Unsafe characters in tunnel name /etc/ppp/peers/ewr~
Unsafe characters in tunnel name /etc/ppp/peers/sdsd~
1.) a
2.) at
3.) atlant
4.) ewr
5.) sdsd
Start a tunnel to which server?: 2
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
CHAP authentication succeeded
CHAP authentication succeeded
local IP address 192.168.10.42
remote IP address 213.184.254.33
Usage: route [-nNvee] [-FC] [<AF>] List kernel routing tables
route [-v] [-FC] {add|del|flush} ... Modify routing table for AF.
route {-h|--help} [<AF>] Detailed usage syntax for specified AF.
route {-V|--version} Display version/author and exit.
-v, --verbose be verbose
-n, --numeric don't resolve names
-e, --extend display other/more information
-F, --fib display Forwarding Information Base (default)
-C, --cache display routing cache instead of FIB
<AF>=Use '-A <af>' or '--<af>'; default: inet
List of possible address families (which support routing):
inet (DARPA Internet) inet6 (IPv6) ax25 (AMPR AX.25)
netrom (AMPR NET/ROM) ipx (Novell IPX) ddp (Appletalk DDP)
x25 (CCITT X.25)
route failed on 192.168.0.10 at /usr/sbin/pptp-command line 806.
[root@localhost ~]#
CHAP authentication succeeded
local IP address 192.168.10.42
remote IP address 213.184.254.33
Usage: route [-nNvee] [-FC] [<AF>] List kernel routing tables
route [-v] [-FC] {add|del|flush} ... Modify routing table for AF.
route {-h|--help} [<AF>] Detailed usage syntax for specified AF.
route {-V|--version} Display version/author and exit.
-v, --verbose be verbose
-n, --numeric don't resolve names
-e, --extend display other/more information
-F, --fib display Forwarding Information Base (default)
-C, --cache display routing cache instead of FIB
<AF>=Use '-A <af>' or '--<af>'; default: inet
List of possible address families (which support routing):
inet (DARPA Internet) inet6 (IPv6) ax25 (AMPR AX.25)
netrom (AMPR NET/ROM) ipx (Novell IPX) ddp (Appletalk DDP)
x25 (CCITT X.25)
route failed on 192.168.0.10 at /usr/sbin/pptp-command line 806.
[root@localhost ~]# ping 213.184.254.33
PING 213.184.254.33 (213.184.254.33) 56(84) bytes of data.
From 213.184.254.33 icmp_seq=1 Packet filtered
From 213.184.254.33 icmp_seq=3 Packet filtered
From 213.184.254.33 icmp_seq=4 Packet filtered
From 213.184.254.33 icmp_seq=5 Packet filtered
From 213.184.254.33 icmp_seq=6 Packet filtered
From 213.184.254.33 icmp_seq=8 Packet filtered
From 213.184.254.33 icmp_seq=10 Packet filtered
[root@localhost ~]# ping 192.168.10.42
PING 192.168.10.42 (192.168.10.42) 56(84) bytes of data.
64 bytes from 192.168.10.42: icmp_seq=1 ttl=64 time=0.063 ms
64 bytes from 192.168.10.42: icmp_seq=2 ttl=64 time=0.066 ms
64 bytes from 192.168.10.42: icmp_seq=3 ttl=64 time=0.059 ms
64 bytes from 192.168.10.42: icmp_seq=4 ttl=64 time=0.059 ms
64 bytes from 192.168.10.42: icmp_seq=5 ttl=64 time=0.060 ms
64 bytes from 192.168.10.42: icmp_seq=6 ttl=64 time=0.060 ms
64 bytes from 192.168.10.42: icmp_seq=7 ttl=64 time=0.067 ms
64 bytes from 192.168.10.42: icmp_seq=8 ttl=64 time=0.061 ms
64 bytes from 192.168.10.42: icmp_seq=9 ttl=64 time=0.062 ms
64 bytes from 192.168.10.42: icmp_seq=10 ttl=64 time=0.062 ms
64 bytes from 192.168.10.42: icmp_seq=11 ttl=64 time=0.061 ms
64 bytes from 192.168.10.42: icmp_seq=12 ttl=64 time=0.062 ms
64 bytes from 192.168.10.42: icmp_seq=13 ttl=64 time=0.059 ms
64 bytes from 192.168.10.42: icmp_seq=14 ttl=64 time=0.060 ms
64 bytes from 192.168.10.42: icmp_seq=15 ttl=64 time=0.060 ms
[root@localhost ~]# pptp-command
1.) start
2.) stop
3.) setup
4.) quit
What task would you like to do?: 2
Sending HUP signal to PPTP processes...
[root@localhost ~]#
Объясните пожалуйста, что вовремя подкючения это, что ему не нравится не пойму>
((( Usage: route [-nNvee] [-FC] [<AF>] List kernel routing tables
route [-v] [-FC] {add|del|flush} ... Modify routing table for AF.
route {-h|--help} [<AF>] Detailed usage syntax for specified AF.
route {-V|--version} Display version/author and exit.
-v, --verbose be verbose
-n, --numeric don't resolve names
-e, --extend display other/more information
-F, --fib display Forwarding Information Base (default)
-C, --cache display routing cache instead of FIB
<AF>=Use '-A <af>' or '--<af>'; default: inet
List of possible address families (which support routing):
inet (DARPA Internet) inet6 (IPv6) ax25 (AMPR AX.25)
netrom (AMPR NET/ROM) ipx (Novell IPX) ddp (Appletalk DDP)
x25 (CCITT X.25)
route failed on 192.168.0.10 at /usr/sbin/pptp-command line 806.)))
Немогу выйти в инет если расказывать то у нас ADSL-модем в свиче (его IP 192.168.183.10) в Винде прописывается этот >192.168.183.10 как основной шлюз, роутер провайдера >(IP 10.1.8.1) который прописывается в создании подключения VPN или так называемый (PPTP), шифрования данных через один протокол СНАР, сетевухе 2 DNS сервера их IP 213.184.255.37 и 213.184.224.254 но я как понел это DNS сервера для всей Беларусии, а у меня припостоянном подключении (PPTP) IP DNS севера 213.184.254.33, как я понел это DNS локальный для моего областного города Могилева. Разуется что при подключении (PPTP) IP клиента присвоенно меняются.
Ивините, за длинное предисловия, но у меня подключения осуществляются но IP rambler.ru не пингуются т.е инета НЕТ. Я выложу события,а ВЫ подскажите кто сможет, ПИЗ!!!
А все локал IP пигуются это 192.168.183.10 и 10.1.8.1.
[root@localhost ~]# pptp-command
1.) start
2.) stop
3.) setup
4.) quit
What task would you like to do?: 1
Unsafe characters in tunnel name /etc/ppp/peers/atlant~
Unsafe characters in tunnel name /etc/ppp/peers/__default~
Unsafe characters in tunnel name /etc/ppp/peers/ewr~
Unsafe characters in tunnel name /etc/ppp/peers/sdsd~
Unsafe characters in tunnel name /etc/ppp/peers/atlant~
Unsafe characters in tunnel name /etc/ppp/peers/__default~
Unsafe characters in tunnel name /etc/ppp/peers/ewr~
Unsafe characters in tunnel name /etc/ppp/peers/sdsd~
1.) a
2.) at
3.) atlant
4.) ewr
5.) sdsd
Start a tunnel to which server?: 2
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
CHAP authentication succeeded
CHAP authentication succeeded
local IP address 192.168.10.42
remote IP address 213.184.254.33
Usage: route [-nNvee] [-FC] [<AF>] List kernel routing tables
route [-v] [-FC] {add|del|flush} ... Modify routing table for AF.
route {-h|--help} [<AF>] Detailed usage syntax for specified AF.
route {-V|--version} Display version/author and exit.
-v, --verbose be verbose
-n, --numeric don't resolve names
-e, --extend display other/more information
-F, --fib display Forwarding Information Base (default)
-C, --cache display routing cache instead of FIB
<AF>=Use '-A <af>' or '--<af>'; default: inet
List of possible address families (which support routing):
inet (DARPA Internet) inet6 (IPv6) ax25 (AMPR AX.25)
netrom (AMPR NET/ROM) ipx (Novell IPX) ddp (Appletalk DDP)
x25 (CCITT X.25)
route failed on 192.168.0.10 at /usr/sbin/pptp-command line 806.
[root@localhost ~]#
CHAP authentication succeeded
local IP address 192.168.10.42
remote IP address 213.184.254.33
Usage: route [-nNvee] [-FC] [<AF>] List kernel routing tables
route [-v] [-FC] {add|del|flush} ... Modify routing table for AF.
route {-h|--help} [<AF>] Detailed usage syntax for specified AF.
route {-V|--version} Display version/author and exit.
-v, --verbose be verbose
-n, --numeric don't resolve names
-e, --extend display other/more information
-F, --fib display Forwarding Information Base (default)
-C, --cache display routing cache instead of FIB
<AF>=Use '-A <af>' or '--<af>'; default: inet
List of possible address families (which support routing):
inet (DARPA Internet) inet6 (IPv6) ax25 (AMPR AX.25)
netrom (AMPR NET/ROM) ipx (Novell IPX) ddp (Appletalk DDP)
x25 (CCITT X.25)
route failed on 192.168.0.10 at /usr/sbin/pptp-command line 806.
[root@localhost ~]# ping 213.184.254.33
PING 213.184.254.33 (213.184.254.33) 56(84) bytes of data.
From 213.184.254.33 icmp_seq=1 Packet filtered
From 213.184.254.33 icmp_seq=3 Packet filtered
From 213.184.254.33 icmp_seq=4 Packet filtered
From 213.184.254.33 icmp_seq=5 Packet filtered
From 213.184.254.33 icmp_seq=6 Packet filtered
From 213.184.254.33 icmp_seq=8 Packet filtered
From 213.184.254.33 icmp_seq=10 Packet filtered
[root@localhost ~]# ping 192.168.10.42
PING 192.168.10.42 (192.168.10.42) 56(84) bytes of data.
64 bytes from 192.168.10.42: icmp_seq=1 ttl=64 time=0.063 ms
64 bytes from 192.168.10.42: icmp_seq=2 ttl=64 time=0.066 ms
64 bytes from 192.168.10.42: icmp_seq=3 ttl=64 time=0.059 ms
64 bytes from 192.168.10.42: icmp_seq=4 ttl=64 time=0.059 ms
64 bytes from 192.168.10.42: icmp_seq=5 ttl=64 time=0.060 ms
64 bytes from 192.168.10.42: icmp_seq=6 ttl=64 time=0.060 ms
64 bytes from 192.168.10.42: icmp_seq=7 ttl=64 time=0.067 ms
64 bytes from 192.168.10.42: icmp_seq=8 ttl=64 time=0.061 ms
64 bytes from 192.168.10.42: icmp_seq=9 ttl=64 time=0.062 ms
64 bytes from 192.168.10.42: icmp_seq=10 ttl=64 time=0.062 ms
64 bytes from 192.168.10.42: icmp_seq=11 ttl=64 time=0.061 ms
64 bytes from 192.168.10.42: icmp_seq=12 ttl=64 time=0.062 ms
64 bytes from 192.168.10.42: icmp_seq=13 ttl=64 time=0.059 ms
64 bytes from 192.168.10.42: icmp_seq=14 ttl=64 time=0.060 ms
64 bytes from 192.168.10.42: icmp_seq=15 ttl=64 time=0.060 ms
[root@localhost ~]# pptp-command
1.) start
2.) stop
3.) setup
4.) quit
What task would you like to do?: 2
Sending HUP signal to PPTP processes...
[root@localhost ~]#
Объясните пожалуйста, что вовремя подкючения это, что ему не нравится не пойму>
((( Usage: route [-nNvee] [-FC] [<AF>] List kernel routing tables
route [-v] [-FC] {add|del|flush} ... Modify routing table for AF.
route {-h|--help} [<AF>] Detailed usage syntax for specified AF.
route {-V|--version} Display version/author and exit.
-v, --verbose be verbose
-n, --numeric don't resolve names
-e, --extend display other/more information
-F, --fib display Forwarding Information Base (default)
-C, --cache display routing cache instead of FIB
<AF>=Use '-A <af>' or '--<af>'; default: inet
List of possible address families (which support routing):
inet (DARPA Internet) inet6 (IPv6) ax25 (AMPR AX.25)
netrom (AMPR NET/ROM) ipx (Novell IPX) ddp (Appletalk DDP)
x25 (CCITT X.25)
route failed on 192.168.0.10 at /usr/sbin/pptp-command line 806.)))