Linux.by

Итак, у меня 9.2.Принтер Lexmark 1000.Ну я его выбрал(1100 еще выбирал), но ни тесттовую страницу не документы не печатает.При печати тестовой страницы пишет следующее
----
I [06/Jun/2004:15:28:28 +0400] Adding start banner page "none" to job 18.
I [06/Jun/2004:15:28:28 +0400] Adding end banner page "none" to job 18.
I [06/Jun/2004:15:28:28 +0400] Job 18 queued on 'printer' by 'root'.
I [06/Jun/2004:15:28:28 +0400] Started filter /usr/lib/cups/filter/pstops (PID 8909) for job 18.
I [06/Jun/2004:15:28:28 +0400] Started filter /usr/lib/cups/filter/foomatic-rip (PID 8910) for job 18.
I [06/Jun/2004:15:28:28 +0400] Started backend /usr/lib/cups/backend/parallel (PID 8911) for job 18.
E [06/Jun/2004:15:28:34 +0400] PID 8910 stopped with status 1!
I [06/Jun/2004:15:28:34 +0400] Hint: Try setting the LogLevel to "debug" to find out more.
----
как быть?

mr.Koddy писал(а): Итак, у меня 9.2.

Что есть 9.2 ???

mr.Koddy писал(а): Принтер Lexmark 1000.Ну я его выбрал(1100 еще выбирал), но ни тесттовую страницу не документы не печатает.При печати тестовой страницы пишет следующее

Какая система печати используется? Чем настраивал?

mr.Koddy писал(а): ----
I [06/Jun/2004:15:28:28 +0400] Adding start banner page "none" to job 18.
I [06/Jun/2004:15:28:28 +0400] Adding end banner page "none" to job 18.
I [06/Jun/2004:15:28:28 +0400] Job 18 queued on 'printer' by 'root'.
I [06/Jun/2004:15:28:28 +0400] Started filter /usr/lib/cups/filter/pstops (PID 8909) for job 18.
I [06/Jun/2004:15:28:28 +0400] Started filter /usr/lib/cups/filter/foomatic-rip (PID 8910) for job 18.
I [06/Jun/2004:15:28:28 +0400] Started backend /usr/lib/cups/backend/parallel (PID 8911) for job 18.
E [06/Jun/2004:15:28:34 +0400] PID 8910 stopped with status 1!
I [06/Jun/2004:15:28:34 +0400] Hint: Try setting the LogLevel to "debug" to find out more.
----
как быть?

Читать сообщения об ошибках! Сказано же: Try setting the LogLevel to "debug" to find out more. Еслі это CUPS, как я подозреваю, то ищем где-то в /etc файл cupsd.conf, внем меняем LogLevel info на LogLevel debug2 и повторяем маніпуляции, затем логи снова сюда. если сам не разберешься.

>>Что есть 9.2 ???
ASPLinux
>>Какая система печати используется? Чем настраивал?
CUPS
ничего не настраивал.
Комментарии:
---
I [12/Jun/2004:22:21:57 +0400] Adding start banner page "none" to job 33.
I [12/Jun/2004:22:21:57 +0400] Adding end banner page "none" to job 33.
I [12/Jun/2004:22:21:57 +0400] Job 33 queued on 'printer' by 'root'.
I [12/Jun/2004:22:21:57 +0400] Started filter /usr/lib/cups/filter/pstops (PID 1439) for job 33.
I [12/Jun/2004:22:21:57 +0400] Started filter /usr/lib/cups/filter/foomatic-rip (PID 1440) for job 33.
I [12/Jun/2004:22:21:57 +0400] Started backend /usr/lib/cups/backend/parallel (PID 1441) for job 33.
E [12/Jun/2004:22:22:08 +0400] PID 1440 stopped with status 1!
I [12/Jun/2004:22:22:08 +0400] Hint: Try setting the LogLevel to "debug" to find out more.
---
Какие будут предложения?

Да кстати, это я пытаюсь напечатать пробную КУАПСовую строницу.
Вот что пишет если я печатают ASCII
---
I [12/Jun/2004:22:24:25 +0400] Adding start banner page "none" to job 34.
I [12/Jun/2004:22:24:25 +0400] Adding end banner page "none" to job 34.
I [12/Jun/2004:22:24:25 +0400] Job 34 queued on 'printer' by 'root'.
I [12/Jun/2004:22:24:25 +0400] Started filter /usr/lib/cups/filter/texttops (PID 1522) for job 34.
I [12/Jun/2004:22:24:25 +0400] Started filter /usr/lib/cups/filter/pstops (PID 1523) for job 34.
I [12/Jun/2004:22:24:25 +0400] Started filter /usr/lib/cups/filter/foomatic-rip (PID 1524) for job 34.
I [12/Jun/2004:22:24:25 +0400] Started backend /usr/lib/cups/backend/parallel (PID 1525) for job 34.
---
Но думаю, это не так важно.

Anonymous писал(а):Какие будут предложения?

Сделать так как я написал в предыдущем своем сообщении. Ты LogLevel так и не поменял. Незабудь убрать # перед этой строчкой и сделать /etc/init.d/cups restart

>>Сделать так как я написал в предыдущем своем сообщении.
Теперь уже поздо об этом говорить
я дополнительно порылся в http://localhost:631/
и получилось вот что
--
118, 0x9a6b0a0[printer-location,4,41])
d [13/Jun/2004:12:09:13 +0400] copy_attribute(0x9a50118, 0x9afeab8[printer-info,4,41])
d [13/Jun/2004:12:09:13 +0400] copy_attribute(0x9a50118, 0x9a6f780[printer-more-info,4,45])
d [13/Jun/2004:12:09:13 +0400] copy_attribute(0x9a50118, 0x9afd500[job-quota-period,4,21])
d [13/Jun/2004:12:09:13 +0400] copy_attribute(0x9a50118, 0x9afdc88[job-k-limit,4,21])
d [13/Jun/2004:12:09:13 +0400] copy_attribute(0x9a50118, 0x9afe5d8[job-page-limit,4,21])
d [13/Jun/2004:12:09:13 +0400] copy_attribute(0x9a50118, 0x9a6b1c8[job-sheets-default,4,42])
d [13/Jun/2004:12:09:13 +0400] copy_attribute(0x9a50118, 0x9a6bf28[device-uri,4,45])
d [13/Jun/2004:12:09:13 +0400] copy_attribute(0x9a50118, 0x9b00490[color-supported,4,22])
d [13/Jun/2004:12:09:13 +0400] copy_attribute(0x9a50118, 0x9b004d0[pages-per-minute,4,21])
d [13/Jun/2004:12:09:13 +0400] copy_attribute(0x9a50118, 0x9b00548[printer-make-and-model,4,41])
d [13/Jun/2004:12:09:13 +0400] copy_attribute(0x9a50118, 0x9af2598[media-supported,4,44])
d [13/Jun/2004:12:09:13 +0400] copy_attribute(0x9a50118, 0x99b2728[media-default,4,44])
d [13/Jun/2004:12:09:13 +0400] copy_attribute(0x9a50118, 0x9af4f70[finishings-supported,4,23])
d [13/Jun/2004:12:09:13 +0400] copy_attribute(0x9a50118, 0x9a61b08[finishings-default,4,23])
d [13/Jun/2004:12:09:13 +0400] copy_attribute(0x9a50118, 0x99b8668[printer-type,4,23])
D [13/Jun/2004:12:09:13 +0400] ProcessIPPRequest: 7 status_code=0
d [13/Jun/2004:12:09:13 +0400] ProcessIPPRequest: Adding fd 7 to OutputSet...
d [13/Jun/2004:12:09:13 +0400] WriteClient: Removing fd 7 from OutputSet...
d [13/Jun/2004:12:09:13 +0400] ReadClient() 7, used=0
D [13/Jun/2004:12:09:13 +0400] ReadClient() 7 POST /printers/printer HTTP/1.1
d [13/Jun/2004:12:09:13 +0400] decode_auth(0xbf1b9008): Authorization string = ""
d [13/Jun/2004:12:09:13 +0400] decode_auth() 7 username=""
d [13/Jun/2004:12:09:13 +0400] IsAuthorized: con->uri = "/printers/printer"
d [13/Jun/2004:12:09:13 +0400] FindBest: uri = "/printers/printer"...
d [13/Jun/2004:12:09:13 +0400] FindBest: Location /admin Limit 7f
d [13/Jun/2004:12:09:13 +0400] FindBest: Location /printers/My_printer Limit 7f
d [13/Jun/2004:12:09:13 +0400] FindBest: Location /printers/printer Limit 7f
d [13/Jun/2004:12:09:13 +0400] FindBest: Location / Limit 7f
d [13/Jun/2004:12:09:13 +0400] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [13/Jun/2004:12:09:13 +0400] FindBest: best = "/printers/printer"
d [13/Jun/2004:12:09:13 +0400] IsAuthorized: auth = 0, satisfy=0...
d [13/Jun/2004:12:09:13 +0400] POST /printers/printer
d [13/Jun/2004:12:09:13 +0400] CONTENT_TYPE = application/ipp
d [13/Jun/2004:12:09:13 +0400] ReadClient() 7 con->data_encoding = length, con->data_remaining = 14933, con->file = 0
d [13/Jun/2004:12:09:13 +0400] ReadClient() 7 REQUEST /var/spool/cups/0000001d=8
d [13/Jun/2004:12:09:13 +0400] ReadClient() 7 writing 1618 bytes to 8
d [13/Jun/2004:12:09:13 +0400] ReadClient() 7, used=0
d [13/Jun/2004:12:09:13 +0400] ReadClient() 7 con->data_encoding = length, con->data_remaining = 12935, con->file = 8
d [13/Jun/2004:12:09:13 +0400] ReadClient() 7 writing 12935 bytes to 8
d [13/Jun/2004:12:09:13 +0400] ReadClient() 7 Closing data file 8, size = 14553.
d [13/Jun/2004:12:09:13 +0400] ProcessIPPRequest(0xbf1b9008[7]): operation_id = 0002
d [13/Jun/2004:12:09:13 +0400] print_job(0xbf1b9008[7], ipp://localhost:631/printers/printer)
D [13/Jun/2004:12:09:13 +0400] print_job: auto-typing file...
D [13/Jun/2004:12:09:13 +0400] print_job: request file type is application/postscript.
d [13/Jun/2004:12:09:13 +0400] check_quotas(0xbf1b9008[7], 0x9a809b8[printer])
D [13/Jun/2004:12:09:13 +0400] check_quotas: requesting-user-name = 'root'
D [13/Jun/2004:12:09:13 +0400] print_job: requesting-user-name = 'root'
I [13/Jun/2004:12:09:13 +0400] Adding start banner page "none" to job 58.
d [13/Jun/2004:12:09:13 +0400] copy_banner(0xbf1b9008[7], 0x9a52678[58], none)
d [13/Jun/2004:12:09:13 +0400] add_file(con=0xbf1b9008[7], job=58, filetype=application/postscript, compression=0)
I [13/Jun/2004:12:09:13 +0400] Adding end banner page "none" to job 58.
d [13/Jun/2004:12:09:13 +0400] copy_banner(0xbf1b9008[7], 0x9a52678[58], none)
I [13/Jun/2004:12:09:13 +0400] Job 58 queued on 'printer' by 'root'.
D [13/Jun/2004:12:09:13 +0400] Job 58 hold_until = 0
d [13/Jun/2004:12:09:13 +0400] SaveJob: Closing file 8...
D [13/Jun/2004:12:09:13 +0400] StartJob(58, 0x9a809b8)
D [13/Jun/2004:12:09:13 +0400] StartJob() id = 58, file = 0/1
D [13/Jun/2004:12:09:13 +0400] job-sheets=none,none
D [13/Jun/2004:12:09:13 +0400] banner_page = 0
D [13/Jun/2004:12:09:13 +0400] StartJob: argv = "printer","58","root","testprint.ps","1","cpi=12 lpi=7 page-bottom=86 page-left=57 page-right=57 page-top=72 scaling=100 wrap","/var/spool/cups/d00058-001"
D [13/Jun/2004:12:09:13 +0400] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
D [13/Jun/2004:12:09:13 +0400] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [13/Jun/2004:12:09:13 +0400] StartJob: envp[2]="USER=root"
D [13/Jun/2004:12:09:13 +0400] StartJob: envp[3]="CHARSET=windows-1251"
D [13/Jun/2004:12:09:13 +0400] StartJob: envp[4]="LANG=ru_RU"
D [13/Jun/2004:12:09:13 +0400] StartJob: envp[5]=""
D [13/Jun/2004:12:09:13 +0400] StartJob: envp[6]="PPD=/etc/cups/ppd/printer.ppd"
D [13/Jun/2004:12:09:13 +0400] StartJob: envp[7]="CUPS_SERVERROOT=/etc/cups"
D [13/Jun/2004:12:09:13 +0400] StartJob: envp[8]="RIP_MAX_CACHE=8m"
D [13/Jun/2004:12:09:13 +0400] StartJob: envp[9]="TMPDIR=/var/spool/cups/tmp"
D [13/Jun/2004:12:09:13 +0400] StartJob: envp[10]="CONTENT_TYPE=application/postscript"
D [13/Jun/2004:12:09:13 +0400] StartJob: envp[11]="DEVICE_URI=parallel:/dev/lp0"
D [13/Jun/2004:12:09:13 +0400] StartJob: envp[12]="PRINTER=printer"
D [13/Jun/2004:12:09:13 +0400] StartJob: envp[13]="CUPS_DATADIR=/usr/share/cups"
D [13/Jun/2004:12:09:13 +0400] StartJob: envp[14]="CUPS_FONTPATH=/usr/share/cups/fonts"
d [13/Jun/2004:12:09:13 +0400] StartJob: Allocating status buffer...
D [13/Jun/2004:12:09:13 +0400] StartJob: statusfds = [ 8 9 ]
D [13/Jun/2004:12:09:13 +0400] StartJob: filterfds[1] = [ 11 -1 ]
D [13/Jun/2004:12:09:13 +0400] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [13/Jun/2004:12:09:13 +0400] StartJob: filterfds[0] = [ 12 13 ]
D [13/Jun/2004:12:09:13 +0400] start_process("/usr/lib/cups/filter/pstops", 0xbff180c0, 0xbff17430, 11, 13, 9)
I [13/Jun/2004:12:09:13 +0400] Started filter /usr/lib/cups/filter/pstops (PID 2055) for job 58.
D [13/Jun/2004:12:09:13 +0400] StartJob: filter = "/usr/lib/cups/filter/foomatic-rip"
D [13/Jun/2004:12:09:13 +0400] StartJob: filterfds[1] = [ 11 14 ]
D [13/Jun/2004:12:09:13 +0400] start_process("/usr/lib/cups/filter/foomatic-rip", 0xbff180c0, 0xbff17430, 12, 14, 9)
I [13/Jun/2004:12:09:13 +0400] Started filter /usr/lib/cups/filter/foomatic-rip (PID 2056) for job 58.
D [13/Jun/2004:12:09:13 +0400] StartJob: backend = "/usr/lib/cups/backend/parallel"
D [13/Jun/2004:12:09:13 +0400] StartJob: filterfds[0] = [ -1 12 ]
D [13/Jun/2004:12:09:13 +0400] start_process("/usr/lib/cups/backend/parallel", 0xbff180c0, 0xbff17430, 11, 12, 9)
I [13/Jun/2004:12:09:13 +0400] Started backend /usr/lib/cups/backend/parallel (PID 2057) for job 58.
d [13/Jun/2004:12:09:13 +0400] StartJob: Adding fd 8 to InputSet...
d [13/Jun/2004:12:09:13 +0400] add_job_state_reasons(0xbf1b9008[7], 58)
D [13/Jun/2004:12:09:13 +0400] ProcessIPPRequest: 7 status_code=0
d [13/Jun/2004:12:09:13 +0400] ProcessIPPRequest: Adding fd 7 to OutputSet...
d [13/Jun/2004:12:09:13 +0400] WriteClient: Removing fd 7 from OutputSet...
D [13/Jun/2004:12:09:13 +0400] [Job 58] Page = 595x842; 0,0 to 595,842
D [13/Jun/2004:12:09:13 +0400] [Job 58] slowcollate=0, slowduplex=0, sloworder=0
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%BoundingBox: 0 0 612 792
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%Pages: 1
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%LanguageLevel: 1
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%DocumentData: Clean7Bit
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%DocumentSuppliedResources: procset testprint/1.0
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%Creator: Michael Sweet, Easy Software Products
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%CreationDate: May 11, 1999
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%Title: Test Page
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%EndComments
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%BeginProlog
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%BeginResource procset testprint 1.1 0
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%EndResource
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%EndProlog
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%Page: 1 1
D [13/Jun/2004:12:09:13 +0400] [Job 58] 0 %%Page: 1 1
D [13/Jun/2004:12:09:13 +0400] [Job 58] pw = 481.0, pl = 684.0
D [13/Jun/2004:12:09:13 +0400] [Job 58] PageLeft = 57.0, PageRight = 538.0
D [13/Jun/2004:12:09:13 +0400] [Job 58] PageTop = 770.0, PageBottom = 86.0
D [13/Jun/2004:12:09:13 +0400] [Job 58] PageWidth = 595.0, PageLength = 842.0
d [13/Jun/2004:12:09:13 +0400] ReadClient() 7, used=0
D [13/Jun/2004:12:09:13 +0400] CloseClient() 7
d [13/Jun/2004:12:09:13 +0400] CloseClient: Removing fd 7 from InputSet and OutputSet...
D [13/Jun/2004:12:09:14 +0400] [Job 58] foomatic-rip version $Revision: 3.30 $ running...
D [13/Jun/2004:12:09:14 +0400] [Job 58] Parsing PPD file ...
D [13/Jun/2004:12:09:14 +0400] [Job 58] Added option ColorSpace
D [13/Jun/2004:12:09:14 +0400] [Job 58] Added option PageSize
D [13/Jun/2004:12:09:14 +0400] [Job 58] Added option PageRegion
D [13/Jun/2004:12:09:14 +0400] [Job 58] Added option ImageableArea
D [13/Jun/2004:12:09:14 +0400] [Job 58] Added option PaperDimension
D [13/Jun/2004:12:09:14 +0400] [Job 58] Added option InkType
D [13/Jun/2004:12:09:14 +0400] [Job 58] Added option Brightness
D [13/Jun/2004:12:09:14 +0400] [Job 58] Added option Font
D [13/Jun/2004:12:09:14 +0400] [Job 58]
D [13/Jun/2004:12:09:14 +0400] [Job 58] Parameter Summary
D [13/Jun/2004:12:09:14 +0400] [Job 58] -----------------
D [13/Jun/2004:12:09:14 +0400] [Job 58]
D [13/Jun/2004:12:09:14 +0400] [Job 58] Spooler: cups
D [13/Jun/2004:12:09:14 +0400] [Job 58] Printer: printer
D [13/Jun/2004:12:09:14 +0400] [Job 58] PPD file: /etc/cups/ppd/printer.ppd
D [13/Jun/2004:12:09:14 +0400] [Job 58] Printer model: Lexmark 1100, Foomatic + lm1100 (recommended)
D [13/Jun/2004:12:09:14 +0400] [Job 58] Job title: testprint.ps
D [13/Jun/2004:12:09:14 +0400] [Job 58] File(s) to be printed:
D [13/Jun/2004:12:09:14 +0400] [Job 58] <STDIN>
D [13/Jun/2004:12:09:14 +0400] [Job 58]
D [13/Jun/2004:12:09:14 +0400] [Job 58] Pondering option 'cpi=12'
D [13/Jun/2004:12:09:14 +0400] [Job 58] Unknown option cpi=12.
D [13/Jun/2004:12:09:14 +0400] [Job 58] Pondering option 'lpi=7'
D [13/Jun/2004:12:09:14 +0400] [Job 58] Unknown option lpi=7.
D [13/Jun/2004:12:09:14 +0400] [Job 58] Pondering option 'page-bottom=86'
D [13/Jun/2004:12:09:14 +0400] [Job 58] Unknown option page-bottom=86.
D [13/Jun/2004:12:09:14 +0400] [Job 58] Pondering option 'page-left=57'
D [13/Jun/2004:12:09:14 +0400] [Job 58] Unknown option page-left=57.
D [13/Jun/2004:12:09:14 +0400] [Job 58] Pondering option 'page-right=57'
D [13/Jun/2004:12:09:14 +0400] [Job 58] Unknown option page-right=57.
D [13/Jun/2004:12:09:14 +0400] [Job 58] Pondering option 'page-top=72'
D [13/Jun/2004:12:09:14 +0400] [Job 58] Unknown option page-top=72.
D [13/Jun/2004:12:09:14 +0400] [Job 58] Pondering option 'scaling=100'
D [13/Jun/2004:12:09:14 +0400] [Job 58] Unknown option scaling=100.
D [13/Jun/2004:12:09:14 +0400] [Job 58] Pondering option 'wrap'
D [13/Jun/2004:12:09:14 +0400] [Job 58] Unknown boolean option "wrap".
D [13/Jun/2004:12:09:14 +0400] [Job 58]
D [13/Jun/2004:12:09:14 +0400] [Job 58] ================================================
D [13/Jun/2004:12:09:14 +0400] [Job 58]
D [13/Jun/2004:12:09:14 +0400] [Job 58] File: <STDIN>
D [13/Jun/2004:12:09:14 +0400] [Job 58]
D [13/Jun/2004:12:09:14 +0400] [Job 58] ================================================
D [13/Jun/2004:12:09:14 +0400] [Job 58]
D [13/Jun/2004:12:09:14 +0400] [Job 58] Reading PostScript input ...
D [13/Jun/2004:12:09:14 +0400] [Job 58] --> This document is DSC-conforming!
D [13/Jun/2004:12:09:14 +0400] [Job 58]
D [13/Jun/2004:12:09:14 +0400] [Job 58] -----------
D [13/Jun/2004:12:09:14 +0400] [Job 58] Found: %%BeginProlog
D [13/Jun/2004:12:09:14 +0400] [Job 58] 0 %%EOF
D [13/Jun/2004:12:09:14 +0400] [Job 58] Saw EOF!
D [13/Jun/2004:12:09:14 +0400] [Job 58] Found: %%EndProlog
D [13/Jun/2004:12:09:14 +0400] [Job 58]
D [13/Jun/2004:12:09:14 +0400] [Job 58] -----------
D [13/Jun/2004:12:09:14 +0400] [Job 58] Found: %%BeginSetup
D [13/Jun/2004:12:09:14 +0400] [Job 58] Inserting PostScript code for CUPS' page accounting
D [13/Jun/2004:12:09:14 +0400] [Job 58] Found: %%BeginFeature: *InkType Black
D [13/Jun/2004:12:09:14 +0400] [Job 58] Option: InkType=Black --> Setting option
D [13/Jun/2004:12:09:14 +0400] [Job 58] Found: %% FoomaticRIPOptionSetting: InkType=Black
D [13/Jun/2004:12:09:14 +0400] [Job 58] Option: InkType=Black --> Setting option
D [13/Jun/2004:12:09:14 +0400] [Job 58] Found: %%BeginFeature: *PageSize A4
D [13/Jun/2004:12:09:14 +0400] [Job 58] Option: PageSize=A4 --> Option will be set by PostScript interpreter
D [13/Jun/2004:12:09:14 +0400] [Job 58] Found: %%BeginFeature: *Brightness 100
D [13/Jun/2004:12:09:14 +0400] [Job 58] Option: Brightness=100 --> Setting option
D [13/Jun/2004:12:09:14 +0400] [Job 58] Found: %% FoomaticRIPOptionSetting: Brightness=100
D [13/Jun/2004:12:09:14 +0400] [Job 58] Option: Brightness=100 --> Setting option
D [13/Jun/2004:12:09:14 +0400] [Job 58] Found: %%EndSetup
D [13/Jun/2004:12:09:14 +0400] [Job 58]
D [13/Jun/2004:12:09:14 +0400] [Job 58] -----------
D [13/Jun/2004:12:09:14 +0400] [Job 58] New page: 1 1
D [13/Jun/2004:12:09:14 +0400] [Job 58] Inserting option code into "PageSetup" section.
D [13/Jun/2004:12:09:14 +0400] [Job 58] No page header or page header not DSC-conforming
d [13/Jun/2004:12:09:14 +0400] PID 2055 exited with no errors.
D [13/Jun/2004:12:09:14 +0400] [Job 58] Stopping search for page header options
D [13/Jun/2004:12:09:14 +0400] [Job 58] Found:
D [13/Jun/2004:12:09:14 +0400] [Job 58] pageHeight sub % Move down...
D [13/Jun/2004:12:09:14 +0400] [Job 58] --> Output goes directly to the renderer now.
D [13/Jun/2004:12:09:14 +0400] [Job 58]
D [13/Jun/2004:12:09:14 +0400] [Job 58]
D [13/Jun/2004:12:09:14 +0400] [Job 58] Starting renderer
D [13/Jun/2004:12:09:14 +0400] [Job 58] JCL: <job data>
D [13/Jun/2004:12:09:14 +0400] [Job 58]
D [13/Jun/2004:12:09:14 +0400] [Job 58] renderer PID pid4=2059
D [13/Jun/2004:12:09:14 +0400] [Job 58] renderer command: gs -q -sDEVICE=ppmraw -r300 -dBATCH -dNOPAUSE -dPARANOIDSAFER -sOutputFile=- - | lm1100 -bw -b 100 -
D [13/Jun/2004:12:09:14 +0400] [Job 58] foomatic-gswrapper: gs '-sDEVICE=ppmraw' '-r300' '-dBATCH' '-dNOPAUSE' '-dPARANOIDSAFER' '-sOutputFile=| cat >&3' '/dev/fd/0' 3>&1 1>&2
D [13/Jun/2004:12:09:14 +0400] [Job 58] sh: line 1: lm1100: command not found
D [13/Jun/2004:12:09:14 +0400] [Job 58] GNU Ghostscript 7.07 (2003-05-17)
D [13/Jun/2004:12:09:14 +0400] [Job 58] Copyright (C) 2003 artofcode LLC, Benicia, CA. All rights reserved.
D [13/Jun/2004:12:09:14 +0400] [Job 58] This software comes with NO WARRANTY: see the file PUBLIC for details.
--
переустановка принтера не помогает.

Да, еще забыл сказать, что также когда я с параметрами принтера через http://localhost:631/ упражнялся, то добился пару раз того, что журнал ошибок был вообще пуст(с исправленным конфигом купса), то все равно ничего не печатолось

Есть мненіе, что чего-то в сістеме на хватает...

>>Есть мненіе, что чего-то в сістеме на хватает...
хм...но раньше ж хватало,пока я не "поупражнялся"

Итак,переустановил я систему(соорудил пару глюков) и сделал все как написал Llama. По-прежнему тестовая страница купс не печатается ну естественно другие проги тоже не печатают.Журнал ошибок пуст.

use lprng

>> use lprng
Не,ну это не серьезно.Ну а вообще этот тоже не пашет.

у меня hp lj 1100 прекрасно работает с lprng

хм...ну это от принтера наверное ависит

Кстати, да. Вполне возможно.