Linux.by

Код: Выделить всё

hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:07.2: port 2 portsc 008a,00
hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
usb 1-2: USB disconnect, address 2
usb 1-2: usb_disable_device nuking all URBs
usb 1-2: unregistering interface 1-2:1.0
usb 1-2:1.0: hotplug
usb 1-2: unregistering device
usb 1-2: hotplug
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
uhci_hcd 0000:00:07.2: suspend_rh (auto-stop)
uhci_hcd 0000:00:07.2: wakeup_rh (auto-start)
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:07.2: port 2 portsc 0093,00
hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: default language 0x0409
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: IRIVER Mass Storage Device
usb 1-2: Manufacturer: IRIVER
usb 1-2: hotplug
usb 1-2: adding 1-2:1.0 (config #1, interface 0)
usb 1-2:1.0: hotplug
ub 1-2:1.0: usb_probe_interface
ub 1-2:1.0: usb_probe_interface - got id
ub: cmd #0 cmd status (-104)
ub(1.3): GetMaxLUN returned 0, using 1 LUNs
ub: cmd #1 cmd status (-104)
ub: cmd #2 cmd status (-104)
ub: cmd #3 cmd status (-104)
ub: cmd #4 cmd status (-104)
ub: cmd #5 cmd status (-104)
ub: cmd #6 cmd status (-104)
ub: cmd #7 cmd status (-104)
ub: cmd #8 cmd status (-104)
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ub: cmd #9 cmd status (-104)
ub: cmd #10 cmd status (-104)
ub: cmd #11 cmd status (-104)
ub: cmd #12 cmd status (-104)
ub: cmd #13 cmd status (-104)

Код: Выделить всё

hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:07.2: port 2 portsc 008a,00
hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
usb 1-2: USB disconnect, address 7
usb 1-2: usb_disable_device nuking all URBs
usb 1-2: unregistering interface 1-2:1.0
usb 1-2:1.0: hotplug
usb 1-2: unregistering device
usb 1-2: hotplug
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
uhci_hcd 0000:00:07.2: suspend_rh (auto-stop)
uhci_hcd 0000:00:07.2: wakeup_rh (auto-start)
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:07.2: port 2 portsc 0093,00
hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb 1-2: new full speed USB device using uhci_hcd and address 8
usb 1-2: khubd timed out on ep0in len=18/64
uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000
[cf92d180] link (0f92d142) element (09b5f000)
  0: [c9b5f000] link (09b5f040) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=8, PID=2d(SETUP) (buf=0b000da0)
  1: [c9b5f040] link (09b5f080) e3 SPD Active Length=0 MaxLen=11 DT1 EndPt=0 Dev=8, PID=69(IN) (buf=0aa1a720)
  2: [c9b5f080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=8, PID=e1(OUT) (buf=00000000)

usb 1-2: device descriptor read/all, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 9
usb 1-2: khubd timed out on ep0in len=0/64
usb 1-2: khubd timed out on ep0in len=0/64
uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000
[cf92d180] link (0f92d122) element (09b5f000)
  0: [c9b5f000] link (09b5f040) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=0aa1a720)
  1: [c9b5f040] link (09b5f080) e3 SPD Active Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00d69e60)
  2: [c9b5f080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)

usb 1-2: device descriptor read/64, error -71
usb 1-2: khubd timed out on ep0in len=18/64
uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000
[cf92d180] link (0f92d142) element (09b5f000)
  0: [c9b5f000] link (09b5f040) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=9, PID=2d(SETUP) (buf=0b000f40)
  1: [c9b5f040] link (09b5f080) e3 SPD Active Length=0 MaxLen=11 DT1 EndPt=0 Dev=9, PID=69(IN) (buf=0aa1a720)
  2: [c9b5f080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=9, PID=e1(OUT) (buf=00000000)

usb 1-2: device descriptor read/all, error -71
usb 1-2: new full speed USB device using uhci_hcd and address 10
usb 1-2: khubd timed out on ep0out len=0/0
usb 1-2: khubd timed out on ep0out len=0/0
usb 1-2: device not accepting address 10, error -110
usb 1-2: new full speed USB device using uhci_hcd and address 11
uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000
[cf92d180] link (0f92d142) element (09b5f000)
  0: [c9b5f000] link (09b5f040) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=b, PID=2d(SETUP) (buf=0b000b40)
  1: [c9b5f040] link (09b5f080) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=b, PID=69(IN) (buf=0aa1a720)
  2: [c9b5f080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=b, PID=e1(OUT) (buf=00000000)

usb 1-2: device descriptor read/8, error -71
uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000
[cf92d180] link (0f92d142) element (09b5f000)
  0: [c9b5f000] link (09b5f040) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=b, PID=2d(SETUP) (buf=0b000b40)
  1: [c9b5f040] link (09b5f080) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=b, PID=69(IN) (buf=0aa1a720)
  2: [c9b5f080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=b, PID=e1(OUT) (buf=00000000)

usb 1-2: device descriptor read/8, error -71
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0004